Lee Six Pack Pro Reloading Press

The culmination of nearly 40 years of progressive press design and production. Years of comments and suggestions have been incorporated into this new press.

Includes: Six Pack Reloading Press, small and large primer system, bin and bracket and universal case feed magazine.

Photo shows Six Pack Pro Press only mounted to the Lee Bench Plate, sold separtely.

Reloading dies, Shell plate, Auto Drum Powder Measure and rifle short or long charging dies sold separately.

(LEE91823)

Six stations allow any brand of die be used -- in line bullet feed dies, powder check dies etc.
Simple and reliable automatic indexing -- just one moving part, replaceable in seconds, no tools required and never requires adjustment.
Stroke and clearance sufficient for largest magnum rifle cases. Uses the same all steel linkage found on our Classic Cast 50 BMG press.
Massive 28.4mm ram glides through 82 mm of solid steel giving the ram over 7300 mm2 of solid support.
All dies securely fastened in the upper die carrier with the LEE Smart Lock Bushings (sold seperately). No more turret or tool head to replace or move during use.
Automatic priming system - simple, reliable and safe with any brand or size of primer. Primes at the bottom of stroke so all six stations are available for operations.
Automatic case inserter works with any case. Cases can be manually fed through the convenient loading port. Includes the Lee case feed magazine, works with most hand gun cases and all AR rifle cases.
Easy to set case retainers on every station. No springs, plugs or buttons to loose or tinker with.
Cartridge changeover in seconds, including primer size with no adjustments.
Automatic case ejector reliably whisks away your completed round to the ammo bin.
Press includes combination tool rack, bin bracket, along with free ammo bin.
Maximum cartridge overall length 30/06 3.340" C.O.A.L.

Maximum cartridge overall length	30/06 3.340" C.O.A.L.
Base material	Steel
Columns material	Steel
Ram	Steel
Ram diameter	Over 1"
Linkage	Steel
Shell plate carrier material	Steel
Shell plate carrier cover material	Zamak 5 Zinc
Tool head material	Aluminum
Die size accepted	7/8" x 14
Number of die mounting holes	6
Breech Lock Quick Change bushings	Yes
Priming feature	Yes, no primer brand restriction
Spent primer collection tube	Yes
Country of origin	Proudly made in USA